Workshop Products

This unique product Q Bond is one of the finest products for repairing various types of breaks, cracks and other damages to a wide range of items. ...

The plastic mixer tips are vital for the correct mixing of the urethane. These mixer tips with, a spiral insert, not only ensure that the product i...

Pack of 50 water based tack cloths, used for reducing the dust/dirt particles on your panel work prior to the application of base or clear coats, a...

Low viscosity super glue, cure time 2-40 seconds depending on substrate and environment. Gap fill 0.10mm.

3-ply, lint-free, soft paper towels designed for cleaning and degreasing cars, tools, and body parts. suitable for degreasing before painting 100...

Dermohand cleaner gel for removing the toughest dirt. It completely removes varnish, putty, silicone, enamel, and similar products from the hands. ...

1-951 Silicone Remover. Technical Data Sheet Safety Data Sheet

Self tappers with black plastic heads. 4.8 x 18mm

Pack of 100 rivets. Ø (A) x L (B) – 3.2 x 10mm Flange Ø (C) – 9.2mm

Made of premium-grade cobalt steel, this 6mm spot weld drill is designed for releasing steel panels and sheets from spot welds. Consistent and reli...

The 8mm Spot Weld drill is designed for drilling out spot welds to release steel panels and sheets. Made from premium-grade cobalt steel for consis...

Often referred to as crows feet wipes this product is a very low lint, solvent and chemical resistant, strong wiper ideally used for pre cleaning a...

Workshop floor & industrial cleaner Foam-inhibited highly concentrated, NTA-, phosphate- and solvent-free, high-alkaline cleaner for removing t...

The versatile Tork Heavy-Duty Cleaning Cloth is thick, extremely sturdy, and highly absorbent; it can resist vigorous cleaning without coming apart...

Water displacing multi-purpose lubricant designed to penetrate close tolerances, free rusted together parts, displace water, restore electrical cir...

SprayMax 1K Aqua Silicone Remover is a water-based panel wipe in an aerosol. This cleaning agent is rich in active ingredients with a reduced solve...

The Holts Brake & Parts Cleaner works to clean and degrease any surface with fast acting and quick drying properties. Safe for use on paintwork...

The Loctite LB 8201 Universal Lubricant is a multi-purpose oil, used to free seized or corroded parts. Its uses include but are not limited to lubr...

Loctite Bonderite Wipes are water-based pre-treatment wipes, designed for use on metals such as aluminium, zinc, and steel. These chromium-free wip...

The Loctite Citrus Pumice hand cleaner is a general purpose, no-rinse formula, designed to remove the likes of epoxies and greases without the hars...

AB Type. Black. BS 4174. No. x Length: 8 x 1/2" Size x Length: 4.2 x 13mm

Tapping screws with captive washer. Grade 8.8 Zinc. Thread: M6 x 18mm Size Ø: M6 Washer Ø: 18mm

Self tappers with white plastic heads. 4.8 x 18mm

Gauge x L: 12 x 3/4" Size Ø: 4.8 Head Ø: 16mm

Note: this product is not kept on our shelves, and as such a longer lead time should be expected when ordering. Suits Volkswagen and Audi. Sold as ...

Suits Ford. Sold as a pack of 20. Head Ø x Height: 17.5 x 21mm Fits Hole Ø: 8mm

Self tappers with white hinged caps. No. 8 x 3/4" (4.2 x 19mm) Pan Head - Pozi.

Self-adhesive with 2 screw holes. For a tie width of 4.8mm.

SAS Universal Maintenance Lubricant works to free seized parts. Quickly loosens rusted nuts and bolts. Breaks down grease, dirt and grime. Inhibit...

Pack of 10 chimney nuts. Screw size: M6 Dimensions: 16.0 x 24.0 x 8.5 mm

Steam tempered. 118º point angle. Sold as a pack of 10. Choose your width from our dropdown menu.

White panel clip with black foam washer. Suits Hyundai/Kia. Sold as pack of 50. Ø x Height: 18 x 14.5mm Fits Hole Ø: 10mm

Green strip clips. Sold as a pack of 20. W x D x H: 14 x 8 x 11.5mm For Hole Ø: 4mm

Suits Toyota. Sold as a pack of 50. Head Ø x Height: 18 x 37.5mm Fits Hole Ø: 8.5mm