Sealers, Coatings & Adhesives

Smart Express 20gms tube of fast drying filler for various smart repair applications, can be used on alloy wheels, panel repair and some hard plast...

200ml Smart Express aerosol activator for the fast curing of all acculyte flexi gels, clear and black. Acculyte gels are often referred to as AC gels.

3M Polyurethane Seam Sealer is a 1K moisture curing polyurethane products designed for seam sealing applications in car body repair. With excellent...

Smart Express 50gms bottle of black AC gel is a flexible version of the AC gel that cures in under 30 seconds. It is perfect for small plastic repa...

A specially blended solvent that provides easy clean up of most types of adhesives, and quickly removes waxes, greases, oil and tars. When properly...

Non-hardening, non shrinking sealer for the installation of rubber gasket windscreens. Excellent water and weather resistance. Remains flexible per...

This 3M rubber based coating was developed to enable most manufacturers' stone chip finishes to be reproduced in the bodyshop. Black, white, and gr...

The 3M Panel Bonding Adhesive is a two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replac...

Inner cavity wax protection for the small repair or difficult to reach areas. Ideal for protecting cavities in fully or partially enclosed parts of...

Velour top spray adhesive, use this when flocking/blending out fibres.

This Super Seam Sealer is easily applied by brush and dries to leave visible brush marks. Does not snag. Quick drying. Petrol, oil and water resist...

3M Superfast Plastic Adhesive is a two-part urethane adhesive used for repairing, rebuilding, reshaping, and bonding plastic easily through use wit...

Smart Express rigid glue, is a two component, urethane-based adhesive supplied in a 50ml twin cartridge. Used in most rigid plastic repair applicat...

3M Nylon Seam Sealer Brushes is designed to brush out adhesive or sealer to give the desired textured appearance. Allows you to replicate OEM finis...

Simple, quick, and clean in minutes. Application of heat speeds curing. No shrinkage. No gun cleaning. Rippled appearance achieved by changing angl...

3M's Aerosol Auto Adhesive is specially designed to bond a wide variety of surfaces. This general purpose aerosol adhesive is ideal for trim fabric...

Ideal for both wet and dry sanding, this revolutionary product for applying a guide coat to the repair area makes the sanding process controllable ...

3M PU Bonded Windscreen Sealer is clear and safe application method, these user friendly cartridges are designed for windscreen, side and rear bond...

Smart Express flexi glue, is a two component, urethane-based adhesive supplied in a 50ml twin cartridge.Can be used in most flexible plastic repair...

3M Schutz 8861 is a thick, asphalt-based product ideal for vehicle underbody coating to give both rust proofing and sound-deadening properties. Fle...

The 4 Bottle RAPTOR kit is the industry standard in bedliner coatings. Each kit contains 4 bottles of RAPTOR and a tin of hardener, with a FREE OF...

Teroson SB S3000 is a synthetic resin-based anti-chip coating product for use on stone chip and spot repair tasks. Ideal for stone chip and spot re...

Teroson MS 9320 is a body repair seam sealant for reproducing OEM texture refinish. Solvent- and isocyanate-free silane-modified polymer. Ideal to ...

An advanced adhesion promoter for most plastic parts.

Teroson MS 9220 is suitable for all areas where bonding and sealing is required. Excellent bonding and sealing properties for bonding various mater...

PRO Plasti Grip is an advanced plastic adhesion promoter for most types of plastics.  With fast drying properties, Plasti Grip creates a clear film...

Teroson PU 9100 is a 1-component polyurethane sealing product for all areas that require sealing. Designed for seam and joint sealing. Use any type...

The Teroson PU 9500 foam is a two-component polyurethane foam with sound-deadening properties. Ideal for refixing preformed acoustic parts, in addi...

The Teroson Widestream Nozzle II is a dispensing nozzle used for seam sealing and acoustic applications in order to replicate OEM textures. Use wit...

This clear Acculyte AC gel is comprised of high viscosity cyanoacrylate, which acts as an excellent gap filler. Its thixotropic, non-drip formula m...

Fusor Mixing Tip 225/300ml. Single nozzle.

Indasa Standard White Nozzle for 310ml Cartridge.

Fusor 208B Panel Bonding Adhesive is a a two-component, epoxy-based panel bonding adhesive. This formula is tack-free when cured and creates an ext...

Give damaged vehicle plastics a seamless new look with 3M Flexible Parts Repair Material. The repair material is fast drying, extremely flexible an...

Note: this product is not kept on our shelves, but is available to order – please contact our team referencing this product to place your order. Th...

Teroson PU 9200 is a 1-component polyurethane sealing product for all areas that require sealing. Designed for seam and joint sealing. Use any type...