Bilt Hamber Re-View Deep Cleaning Glass Polish

Re-View is a powerful active polish designed by Bilt Hamber to effectively strip any glass contaminating films, water-repellent coatings, hard water marks and mineral staining. Unlike other glass polishes, Re-View will remove these films even when used by hand, though machine use is also possible.

Precautions

Apply only on glass surfaces. Do not use on aftermarket or plastic tinted windows. Test at a small scale on unusual glass finishes. Do not use on textured glass.

Store in cool conditions away from direct sunlight and do not allow to freeze.

Directions for Use

1. SHAKE WELL BEFORE USE.
2. Treat only cool glass surfaces, out of direct sunlight. Clean glass of loose particulate dirt.
3. For every 30cm square of glass, use approximately one pea-sized amount applied by a damp, soft cotton cloth or suede microfibre, work well into glass using small circular motions.
4. Mist lightly with water occasionally if machine polishing or if treating larger areas of glass.
5. Residue may be rinsed when still wet, or buffed easily away with a dry microfibre cloth once FULLY dried.
6. Test that glass does not repel water on completion by atomising water onto the cleaned area. Fully cleaned and decontaminated glass will show a flat uniform film of water.
7. Wipe dry after test.