Workshop Warehouse

Sold in a pack of 20. Ø x H: 21.5 x 20mm For Hole Ø: 10mm

Note: this product is not kept on our shelves, and as such a longer lead time should be expected when ordering. Absorbent, durable, and re-usable w...

Flexible bi-metal, high speed steel. A pack of 10 hacksaw blades with a 24 TPI (teeth per inch) pitch.

Standard type cable ties, sold in a pack of 100. Width: 7.6mm Length: 390mm

Standard type cable ties, sold in a pack of 100. Width: 4.6mm Length: 390mm

Standard type cable ties, sold in a pack of 100. Width: 4.8mm Length: 270mm

Standard type cable ties, sold in a pack of 100. Width: 4.6mm Length: 200mm

Standard type cable ties, sold in a pack of 100. Width: 3.5mm Length: 150mm

Standard type cable ties, sold in a pack of 100. Width: 2.5mm Length: 100mm

Moulded resin body blowgun with ergonomic handle for comfortable use. Maximum working pressure: 10 bar.

Tapping screws with captive washer. Grade 8.8 Zinc. Thread: M6 x 18mm Size Ø: M6 Washer Ø: 18mm

Note: this product is not kept on our shelves, and as such a longer lead time should be expected when ordering. Multi-Purpose. Instant bond on...

Self tappers with white plastic heads. 4.8 x 18mm

Gauge x L: 12 x 3/4" Size Ø: 4.8 Head Ø: 16mm

Note: this product is not kept on our shelves, and as such a longer lead time should be expected when ordering. Suits Volkswagen and Audi. Sold as ...

13 amp with safety sleeving.BS 1363/A.

AB Type. Black. BS 4174. No. x Length: 8 x 1/2" Size x Length: 4.2 x 13mm

Suits Ford. Sold as a pack of 20. Head Ø x Height: 17.5 x 21mm Fits Hole Ø: 8mm

Self tappers with white hinged caps. No. 8 x 3/4" (4.2 x 19mm) Pan Head - Pozi.

Self-adhesive with 2 screw holes. For a tie width of 4.8mm.

Bi-metal flexible blade with 8% cobalt HSS variable tooth pitch cutting edge. Teeth are brought into action at varying angles for faster, smoother ...

Non-adhesive linen/cloth tape, suitable to wrap wiring looms for protection against abrasion. Can also be used to prevent cuts by sharp edges on cu...

Double sided adhesive number plate pads. 80 x 25mm.

Pack of 10 chimney nuts. Screw size: M6 Dimensions: 16.0 x 24.0 x 8.5 mm

Protective cable end shroud with grip collars. These are designed to protect uninsulated cable ends, connectors and lugs. The flexible gripping col...

The EVH multimeter and insulation tester is designed for testing and checking components on electric and hybrid vehicles through the continuity tes...

Insulated safety lockout padlocks are used to secure the insulation port lockout device. Nylon body and hasp ensures the padlock is fully insulated...

Electric/hybrid vehicle warning signage to be used with Workshop Warehouse barrier chains. Lightweight and portable polymer panel signs.  Mounting ...

High visibility warning to alert all personnel that the serviced/repaired vehicle is a hybrid or an electric vehicle. To be used with additional si...

The first aid and CPR advice poster offers a full procedure and precautions against electric shocks from EV/hybrids. Displays an easy-to-follow cas...

This full safety procedure wall poster is an essential checklist for technicians preparing for work on electric and hybrid vehicles. Ensures the co...

Hazard warning floor sign to be used with additional signage and warnings to highlight electric/hybrid vehicles and the potential dangers inside th...

Insulated spring-loaded plastic clamp to hold the transparent shroud in place. Secures the shroud in place to prevent slipping and contact with liv...

Transparent shroud 1000V to isolate/protect high voltage parts by preventing accidental contact with live terminals. Easy installation and fitting....

Electrical insulated rubber matting for ensuring the safety of technicians whilst working on electric and hybrid vehicles. Offers protection up to ...

Electrically insulated rescue hook & pole designed to safely remove victims of electric shock from danger. Conforms to NF EN50508 and CEI61235-...