Koch-Chemie GH8.01 Gelcoat Heavy Cut Polishing Compound
£59.29 (Ex VAT)
£59.29 (Ex VAT)
£50.40 (Ex VAT)
£50.40 (Ex VAT)
£50.40 (Ex VAT)
FREE standard delivery on UK orders over £75 for stock items.
Non stock items including equipment and special orders, buyer will be contacted with a delivery schedule.
Abrasive machine polish for reconditioning heavily weathered gelcoats and boat paints with a high degree of sanding and a very good gloss level. Effectively removes greying, deep scratches and scuff marks from fenders, for example.
Produces a good surface shine on dark gelcoats and paint colours in the first polishing step. Gelcoat Heavy Cut can be polished for an extremely long time with low dust and spray development without burning, is very easy to wipe off and free from silicone oils.
Areas of Use
Heavily weathered, greyed and stressed gelcoats and paints in the boat area.
Recommendations for Use
Can be applied using both rotary and eccentric polishing machines. Apply 5 pea-sized drops to a suitable polishing pad (Heavy Cut Pad, Lambswool Pad short or Twisted Wool Pad) and work crosswise. Spread the product evenly over the surface at low speed. Then polish with a rotary machine at max. 1000 RPM (eccentric machine on the highest setting). Remove any remaining polish with a Polish & Sealing Towel.
On dark surfaces, polishing marks can be removed with Gelcoat Micro Cut. We recommend sealing after polishing with Gelcoat Finish, Marine Protective Sealant or ceramic coating to close the pores of the surface.
Shake before use. Check for material compatibility before use. Do not use on hot surfaces. Protect from frost and excessive heat. May cause an allergic skin reaction. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing vapours or spray. Wear protective gloves.
New content loaded
